Falcon 15 manual In & Out Settings Fm Version, 12.3.6NOISE GATE SETTING Noise Gate, Bypass Mode

IN & OUT SETTINGS (FM VERSION) ENG

12.3.6NOISE GATE SETTING (Noise Gate)

The Mpx Module Setup / Noise Gate function allows you to avoid the effects of background noises while the input signal presents a lack of high frequencies. The parameter to be set is the Noise Gate Threshold, which determines the threshold value below which the dynamic pre-emphasis is automatically excluded.

The Noise Gate Threshold: This may be adjusted within a range of –80 to –51dB (1 dB steps).

The Noise Gate function can be turned off if necessary by turning the shuttle counter-clockwise to the Off position.

12.3.7 BYPASS MODE

In Processor ByPass mode, all the processing stages are disabled (AGC system, audio processing and pre- emphasis circuit). It allows you to carry out tests and reference measurements: it is not intended for equipment setup or installation use

Page 31