15.LCD Metering Display - When the UPS is turned on, this portion of the LCD display indicates the AC output voltage initially. Depressing the downward scroll button will indicate the following each time it is depressed:

LCD Metering Display Modes

(use display scroll buttons to change modes; modes are in descending order)

Mode

Value

Display Description

AC Output

Voltage

AC Output Voltage

AC Input

Voltage

AC Input Voltage

AC Output

Frequency (Hz)

AC Output Frequency

Battery

Voltage

DC Battery Voltage

Temperature

ÂșC

Internal UPS Temperature

Timer

Minutes to off

The UPS will turn off when the displayed

 

 

value reaches zero.

Timer

Hours to on

The UPS will turn on when the display

 

 

reaches zero.

Battery

Minutes to off

The estimated remaining battery run time

 

 

while in battery backup mode.

Step 1C

JUMPER

TYPICAL UPS REAR PANEL

65

5

 

4

2

 

 

3

 

 

 

 

4

 

 

3

2

1

JUMPER SLOT

 

 

Battery Fuse

NEMA Type

IEC Type

1.

Battery Disconnect Jumper - To install the Jumper use the following procedure.

a)Using a #1 Phillips screwdriver remove the two screws securing the battery disconnect cover.

b)Remove the battery disconnect jumper plug from the plastic bag.

c)Press the disconnect jumper into the socket visible through the hole exposed after removal of the cover. A small popping sound may occur; this is normal.

9

Page 10
Image 10
Falcon SUP700-1C, SUP1.0K-1C manual LCD Metering Display Modes, Typical UPS Rear Panel