English

Removing the Damper

The printer is protected for shipping by

1

a transportation damper that you must

 

remove before you turn on the printer.

Open the printer by pulling the tab on the front cover, and remove the damper shown in illustration 1.

Note:

Reinstall the damper before shipping.

Using the Power Switch Cover

WARNING:

If an accident occurs with the power switch

cover attached, unplug the power cord 2 immediately. Continued use may cause

fire.

The enclosed power switch cover keeps the power switch from being pressed accidentally. To use the cover, install it as shown in illustration 2.

EPSON

 

F

 

 

 

ORWARD

POW

R

EVERSE

 

ERRORER

 

R

SLIPRELEASE

 

 

 

ELEASE

Installing the Ribbon Cassette

Use the EPSON ERC-31 ribbon cassette. The use of any ribbon cassettes other than those approved by EPSON may damage the printer and will void the warranty.

CAUTION:

Never turn the ribbon cassette’s feed knob in the opposite direction of the arrow marked on the cassette; otherwise the ribbon cassette may be damaged.

1.Turn the printer on, and open the front cover by pulling up the tab on the left side.

2.Be sure the print head is on the right side.

3.If a ribbon is already installed, remove it by grasping the end of the tab and removing it from the printer.

6TM-U590 User’s Manual

Page 6
Image 6
FARGO electronic TM-U590 user manual Removing the Damper, Using the Power Switch Cover, Installing the Ribbon Cassette