Navy Gateway (GW0016) System Manual

The system consists of:

One Gateway box to interface with engine and external senders and sensors.

One 4” Tachometer with Fuel Monitor

Various 2” instruments, including but not limited to

Voltmeter

Oil Pressure gauge

Fuel gauge

Engine Temperature gauge

Transmission Temperature

Quick operation:

1.To turn on the system: Turn the ignition key to “ON” position.

2.To turn off the system: Turn the ignition key to “OFF” position.

3.To turn on instrument lighting: Turn on the light switch on the vehicle instrument panel.

4.To turn off instrument lighting:

Turn off the light switch on the vehicle instrument panel.

5.To change the lighting intensity, (requires the light switch be turned on):

a. Turn on the light switch as described in item 3 above.

b. Pushing the “UP” button on the tachometer will increase the intensity of the instrument lighting. When maximum intensity is reached no further changes can be effected by pushing the “UP” button.

c. Pushing the “DOWN” button on the tachometer will decrease the intensity of the instrument lighting. When minimum

intensity is reached no further changes can be made by pressing the “DOWN” button.

6.To disable the audible alarm in normal mode: PUSH and HOLD both the “UP” and the “DOWN” buttons on the tachometer until the beeping stops.

7.To change the LCD display (engine hour meter, system voltage):

a. Pressing the “Mode” button on the tachometer will select the next LCD display.

b. Press the “Mode” button repeatedly until desired function is displayed. The gateway will switch to a screen displaying the function data within 2 seconds after the button is pressed.

8.To reset Trip Fuel Consumed:

a. Use quick operation 7 above to show “CLR TRP” on the LCD. Hold the “M” button for more than one second while the LCD displays “CLR TRP” to clear the trip

amount.

Page 2

Page 3
Image 3
Faria Instruments manual Navy Gateway GW0016 System Manual