GX75.book Seite 3 Freitag, 18. April 2008 11:14 11
GX 75 |
| us |
1. For your safety.
WARNING Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in elec- tric shock, fire and/or serious injury.
Save all warnings and instructions for future refe- rence.
Do not use this machine before you have
thoroughly read and completely under- stood this Instruction Manual, including the fig- ures, specifications, safety regulations and the signs indicating DANGER, WARNING and
CAUTION.
Only carry out such operations with this machine as intended for by FEIN. Only use appli- cation tools and accessories that have been released by FEIN.
Please also observe the relevant national indus- trial safety regulations.
This Instruction Manual should be kept for later use and enclosed with the machine, should it be passed on or sold.
SAVE THESE INSTRUCTIONS.
1.1 General Safety Notes.
WARNING Pull out the mains plug for main- tenance and repair! Switching
the machine on unintentionally can lead to seri- ous injuries. Avoid accidental starting by making sure the switch is in the
Always wear protective eye wear when operating machinery. Eye
wear shall be impact resistant, protective safety glasses with side shields which comply with ANSI Z87.1 specifications. Use of eye wear which does not comply with ANSI Z87.1 specifications could result in severe injury from breakage of eye protection.
Always use safety glasses. Also
use face or dust mask if cutting
operation is dusty. Everyday eye- glasses only have impact resistant
lenses, they are NOT safety glasses.
Wear appropriate safety clothing. Wear leather safety gloves, arm guards, leather aprons and safety shoes. Wear dust mask and ear protection.
Wear proper apparel. Do not wear loose cloth- ing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Nonslip footwear is recommended. Wear pro- tective hair covering to contain long hair.
Keep guards in place and in working order. Do not operate the machine with any guards removed. Keep hands in sight and clear of all moving parts and rotating cutting tools or sur- faces.
Remove adjusting keys and wrenches. Form habit of checking to see that keys and adjusting wrenches are removed from machine before turning it on.
Keep work area clean. Cluttered areas and benches invite accidents.
Don’t use in dangerous environment. Don’t use power tools in damp or wet locations, or expose them to rain. Keep work area well lighted. Special electrics should be used when working on flammable materials.
Keep children away. All visitors should be kept safe distance from work area.
Make workshop kid proof with padlocks or mas- ter switches.
Don’t force machine. It will do the job better and safer at the rate for which it was designed.
Use right machine. Don’t force machine or attachment to do a job for which it was not designed.
Do not overreach. Keep proper footing and bal- ance at all times. Failure to maintain proper working position can cause you to slip and fall into machine or cause your clothing to get caught, pulling you into the machine.
3
