FieldServer instruction manual FS-8700-60 Gardner Denver Manual Hardware Connections

FS-8700-60 Gardner Denver Manual Page 3 of 11

3.Hardware Connections

The FieldServer is connected to the ES/RS2000 Controller as shown in the connection drawing below:

Configure the ES/RS2000 Controller according to manufacturer’s instructions.

1.03Hardware Connection Tips / Hints

If inter-controller communications are set up for the controller, connect to the RS-232 port only. If inter-controller communications are not used, connect to either the RS- 232 or RS-485 port of the Controller.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com