Playback Your Recordings
Playback using the LCD Monitor
You can also use the LCD monitor to play back your recording.
Before you begin
•Connect the Palmcorder to a power source. (pp. 15, 16)
•Insert a recorded cassette.
1POWER
180° 
90°
90°
2OPEN
3REWIND SEARCH
1 Set the POWER to VCR.
•The POWER lamp lights red.
•Be sure POWER is fully turned to the VCR position.
2 Use OPEN tab on underside of the LCD monitor to unlock and swing open.
3 Press 
(REWIND/SEARCH) to rewind the tape.
4 Press | (PLAY) to start playback. |
5 Press | (STOP) to stop playback. |
• When the tape reaches its beginning during rewind or rewind search, it will
4 stop automatically.
PLAY
Note
•When a tape recorded in LP mode on
another digital video camera is played 5STOP back on this unit, the picture may appear
mosaic.
•Using the LCD monitor reduces battery operating time.
•You can place the Palmcorder on a table, etc. for viewing. Rotate the LCD Monitor 180° and swing it up against the Palmcorder body as shown.
Connecting Earphone (not supplied)
You can connect earphones (not supplied) to the PHONE Jack.
PHONE Jack
32
