On-Screen Displays (OSD)
The following warning displays appear in the EVF and the LCD monitor.
Indications | Condition |
|
|
If the Palmcorder is in CAMERA mode without a cassette inserted, “
” will flash and “TAPE NOT INSERTED” will appear for
5 seconds. Recording will not start.
If the Palmcorder is in CAMERA mode or Audio dub mode with the cassette sliding record tab opened, “
” will flash and “CHECK REC TAB” will appear for 5 seconds. Recording will not start.
When Audio dub is performed and the recording is other than NTSC format, “
” will flash and “CANNOT REC” will appear for 5 seconds.
When the tape is about to end in REC mode, “
END” will flash and “TAPE END” will appear for 5 seconds.
When an incompatible tape is detected, “INCOMPATIBLE
TAPE” will appear for 5 seconds.
If the video heads require cleaning, “NEED HEAD CLEANING” will appear for 5 seconds.
When the Palmcorder and remote are not set to the same mode (VCR1 or VCR2), “CHECK REMOTE MODE (REMOTE)” appears for 5 seconds. It also appears when the Palmcorder is first turned on.
When an AUDIO DUB is attempted on a
If excessive moisture condenses in the unit, “WARNING” will flash, “DEW DETECTED” will appear, and the Palmcorder will automatically turn OFF in 15 seconds.
In this case, wait until the indicator no longer flashes when your Palmcorder is turned ON again.
When a battery recharge is necessary, “WARNING” will flash, “LOW BATTERY” will appear, and the Palmcorder will automatically turn OFF in 15 seconds. (p. 113)
When the Clock Battery is discharged, “CLOCK BATTERY” will appear. To replace the Clock Battery, set POWER to OFF or disconnect the Palmcorder from a power source.
If you play a tape recorded in a format other than NTSC or you try to copy
Card is not inserted.
When a still image is transferred from a tape to an already full Memory Card, or when setting is DPOF, “NO SPACE LEFT” appears.
100
