Other Digital Functions
Use the following features to add interest and professionalism to your recordings or playback. Select from twelve special effects.
3, 4, 5
JOG KEY
2MENU
1POWER
Types of Digital Functions
MIRROR
Symmetrical image from the current camera picture.
STROBE
The recording appears as a sequence of still frames.
MOSAIC
The picture appears in a mosaic pattern.
SLIM
The picture is expanded vertically.
TRAIL
The subject being recorded creates a trail when in motion.
STRETCH
The picture is expanded horizontally. GAIN UP (Not available during playback) Picture sensitivity is increased.
•The image will be brighter than normal, however motion jitter will occur.
WIPE (Not available during playback) Successive scenes are separated in a way which simulates the drawing of a curtain.
MIX (Not available during playback) The current scene is mixed in with the following scene during scene changes.
SEPIA (Only available during playback) The picture is played back in sepia, a brownish color, giving it an antique look.
B/W
The picture is played back in
Digital Features
1 Set POWER to CAMERA or VCR.
2 Press MENU to display the menu screen.
3 Rotate JOG KEY to select DIGITAL EFFECT in the CAMERA or VCR mode menu screen, then press JOG KEY to display the DIGITAL EFFECT menu screen.
4 Rotate JOG KEY to select EFFECT in the CAMERA mode menu screen or EFFECT1 / EFFECT2 in the VCR mode menu screen, and then press JOG KEY repeatedly to select one of the Digital Functions listed on the left.
5 To cancel the Digital Function, press JOG KEY repeatedly to select OFF.
Note
•The EIS and Digital Zoom features are turned off automatically when one of the Digital Functions listed at left is selected.
|
|
| Digital |
To use the WIPE function |
| ||
|
| ||
a. In Camera mode, set the “EFFECT” item |
| ||
in the main menu screen to “WIPE”. |
| ||
(Menu OSD: p. 108) | Features | ||
b.Press REC/PAUSE to start recording. | |||
c. Press REC/PAUSE to pause the |
| ||
recording. The last scene will be |
| ||
memorized. |
| ||
d.Press RECORD/PAUSE to start |
| ||
recording again. The new scene will take |
| ||
the place of the memorized scene. |
| ||
|
|
|
|
To use the MIX function |
|
|
|
a. In Camera mode, set the “EFFECT” item |
| ||
in the main menu screen to “MIX”. |
| ||
(Menu OSD: p. 108) Then, perform steps |
| ||
| |||
The memorized scene and the new |
| ||
scene will appear mixed as the scene |
| ||
changes from one to the other. |
| ||
Note
•When Photo Title is set, WIPE/MIX mode becomes Photo Title. When Photo Title is finished, Digital Function turns OFF.
43
