PHOTOVU/MPEG4 Movie Messenger™ System
Using Tape Image Data (USB)
By connecting the Palmcorder and PC with the USB Cable, you can transfer Motion images and Still images saved on the DV Tape directly to your PC.
Note
•Detail mode cannot be used with a USB connection.
•Deactivate your PC ScreenSaver or this application may shutdown during image capture.
3Movie Capture
3Still Capture
USB
4STOP 2PLAY
To capture Still images
3 Click on [Still Capture] at the point you wish to capture an image.
•Repeat step 3 to continue capturing images.
•Captured Still images are saved to the PC, and you can playback the saved images on the View Manager. (p. 64)
Before you begin
•Insert a recorded tape. (p. 12)
•Make
•Turn your PC on. (p. 60)
•Set Palmcorder POWER to VCR.
1 Repeat steps 1~4 on page 62 to
run the PHOTOVU/MPEG4 Movie Messenger™ System.
Note
•When the USB Cable is connected, the input display will automatically become USB. If it is not USB, please confirm the connection. Then, close and restart the software.
2 Click 
(PLAY) on PC screen to
playback the DV tape.
•The playback screen cannot be viewed on the PC. Please use the LCD monitor on the Palmcorder for confirmation.
To capture Motion images
3 Click on [Movie Capture] at the start point you wish to capture a Motion image.
• “Now capturing a movie” is displayed.
4 Click STOP to end capture.
•“Now Searching...” is displayed.
•The DV Tape is rewound to the point at which the capture was started. The Motion image is then transferred to the PC.
•“Data transfer is now in progress” is displayed on the PC screen.
•The maximum capture time is approx. 30 seconds. Capture stops automatically at the end of 30 seconds.
Note
•Motion images cannot be captured if data contains the following...
•A change between 12 bit and 16 bit.
•A change between SP and LP mode.
•During transfer to the PC, the Motion images will not be displayed on the PC screen.
•Transfer takes from about 30 to 50 seconds for every 1 second of the Motion image when using USB connection.
5 To capture other Motion images, repeat steps 3~4.
PC Connection
63
