FieldServer FS-RA-CLX-FIR, FS-RA-CLX-PRO manual Supplied Equipment, Mounting

SlotServer Start-Up Guide Page 3 of 14

1EQUIPMENT SET-UP

1.1SUPPLIED EQUIPMENT

USB Flash Drive loaded with:

∙SlotServer Start-up Guide

∙SlotServer Configuration Manual

∙FieldServer Utilities Manual

∙All FieldServer Driver Supplements

∙Support Utilities

∙Any additional folders related to special files configured for a specific FieldServer

∙Additional components as required - See Driver Manual Supplement for details

Accessories:

∙2-way combi-comb connector for LonWorks port

∙7-ft Cat5 cable with RJ45 connectors at both ends (Part # FS-8915-10)

1.2THIRD PARTY COMPONENTS (NOT SUPPLIED BY FIELDSERVER TECHNOLOGIES)

The following components will need to be procured as a minimum for achieving ControlLogix integration. Ensure that these are available before commencing with commissioning

Part #	Description
AB1756-Ax	ControlLogix Rack
AB1756-l55/l61	ControlLogix CPU
AB1756-PA7x	ControlLogix PSU
9324-RLD300ENE	RSLOGIX 5000

1.3MOUNTING

The SlotServer plugs directly into the AB1756 ControlLogix rack. Take note of the slot number used for the SlotServer as this will be needed when configuring the I/O in the RSLogix software.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com