First Alert DVR0810 Initial Setup, System Operation, System Start Up, Power On/Off, User Login

System Start Up

Power On/Off

To power the system On/Off, connect the power cable to the DC 12V port on the rear panel. Flip the toggle switch on in the back of the DVR. At startup, the system performs a basic system check and runs an initial loading sequence. After a few moments, the system loads a live display view.

Video Icons Function

Indicates the channel is recording.

Video is unavailable on the channel

Camera speaker icon stays visible on screen

Motion is detected on the channel

Indicates that the monitor is touring camera channels

Indicates audio output is from this channel

User Login

Password

ATTENTION: By default, passwords are disabled on the system. You do not need to enter a password when accessing any system menus. However, for security purposes, it is highly recommended to enable passwords on the system using the Password Menu. See “Password” section for details on setting up passwords. Click OK to confirm password.

Quick Access Menu

When using the mouse, use the Quick Access Menu to access several system options, including the Main Menu. Select one of the following options:

•MAIN MENU: Opens the main system menu

•Record Mode: Allows the user to select the record setting for any or all channels.

•Search: Open the Search Menu to view recorded video

•PTZ Control: Opens the PTZ control menu

•Start Tour: Allows user to start touring the cameras in sequence.

•Volume Regulate: Allows volume adjust during playback mode or when monitoring.

•Logout: Provides options to Logout, Shutdown or to reboot system.

•View 1: Allows viewing of one camera in full screen.

•View 4: Allows viewing of 4 cameras on screen.

•View 8: Allows viewing of 8 cameras on screen, with one screen in larger view.

•View 9: Allows viewing of 8 cameras on screen.

•To close the Sub-Menu, click anywhere on-screen.

INITIAL SETUP

SYSTEM OPERATION

Power Switch

Main Viewing Screen

User Login Menu

Page 13