APPENDIX,
FAQ S
Question: Why is there no audio when playing back?
Answer:
•Check to see that the audio settings for the channels are correct.
•Audio is off in record menu
Question: Why is my system time not correct?
Answer:
•Wrong setting or user did not click “Edit” to confirm
Question: Why doesn’t motion detection work?
Answer:
•The setting of motion detection area is not correct
•Sensitivity is too low
Question: Why do I have a USB device error?
Answer:
•The data being downloaded exceeds the capacity of backup device
•The backup device is incompatible
•The backup device is damaged
Question: Why doesn’t the Remote Control work?
Answer:
•The remote control is too far from the DVR
•Remote control batteries are dead or low
•Remote control is damaged, check by using the control on the DVR
Question: Why can’t I log in over the Internet?
Answer:
•Check the network to see if it is connected. Check if LINK or 100M LED is displayed normally on the panel; use ping xxx.xxx.xxx.xxx (DVR IP) to check if the Internet is linked properly.
•Make sure you are running Windows 7, Vista or XP operating system and Internet Explorer 6.0 - 8.0
•ActiveX control has been blocked. Please manually install ActiveX control again.
•Install DX8.1 and upgrade your video card driver
Question: Why is there no picture or picture is not clear when I preview the recording or playback the recording via Internet Explorer?
Answer:
•Choose “WAN” in “web environment”
•Try opening and closing windows again by right clicking the mouse button
Question: Why am I receiving a message indicating “other members are setting......”
when accessing my DVR settings through Internet Explorer Answer:
•Someone else is setting the DVR or the Main Menu is open on the DVR. Close the DVR configuration interface or exit the DVR.
Question: Why do I get a message stating “Not Enough Resources” when I have not exceeded the 480 frame rate total for NTSC recording?
Answer:
•Although the chipset is the standard NTSC 480, part of the resources are used for other internal functions and cannot be allocated to recording resources. A frame rate of 420 fps is the maximum that can be allocated.
Page 44
