7URXEOH￿&RQGLWLRQV￿￿&RQWLQXHG￿

Other Trouble

AC LOSS

The system is operating on battery power

Displays

(or NO AC)

only due to an AC power failure.

(Continued)

 

If only some lights are out on the premises,

 

 

 

 

check circuit breakers and fuses and

 

 

reset or replace as necessary.

 

 

If AC power cannot be restored and a

 

 

“low system battery” message appears

 

 

(see previous page), CALL FOR

 

 

SERVICE.

 

 

 

 

 

Busy-Standby

If this message remains displayed for more

 

(or dI)

than 1 minute, system is disabled. CALL

 

 

FOR SERVICE.

 

 

 

 

 

OPEN CIRCUIT

The keypad is not receiving signals from

 

(or OC)

the control. CALL FOR SERVICE.

 

 

 

 

 

Long Rng Trbl

If part of your system, back-up Long

 

(or bF)

Range Radio communication has failed.

 

 

CALL FOR SERVICE.

 

 

 

 

 

TELCO FAULT

The telephone line has a problem.

 

(or CHECK 94)

CALL FOR SERVICE.

 

 

 

Total Power Failure

If there is no keypad display at all, and the READY indicator

 

is not lit, operating power (from AC and back-up battery) for the

system has stopped and the system is inoperative. CALL FOR

SERVICE.

In The Event Of Telephone Operational Problems

In the event of telephone operational problems, disconnect the control from the phone line by removing the plug from the phone wall jack. We recommend that your installer demonstrate this disconnection on installation of the system. Do not attempt to disconnect the phone connection inside the control. Doing so will result in the loss of your phone lines. If the regular phones work correctly after the control has been disconnected from the phone wall jack, the control has a problem and you should immediately call for service. If upon disconnection of the control, there is still a problem on the phone line, notify the Telephone Company that they have a problem and request prompt phone repair service. The user may not under any circumstances attempt any service or repairs to the security system. Repairs must be made only by authorized service (see the LIMITED WARRANTY statement for information on how to obtain service).

– 39 –

Page 39
Image 39
First Alert FA130CP manual Busy-Standby, Long Rng Trbl