+639478%68291&)6718;8*7

 

6FKHGXOLQJ￿￿FRQWLQXHG￿

5.

For event number “02,” enter the access group

 

 

 

 

,,￿11%1

￿￿￿￿￿￿￿

 

AM = 0; PM = 1

 

number. Otherwise, this prompt is skipped.

 

 

 

 

 

Press [] to continue to the “Start” prompt below.

 

 

 

<

7.

Enter the event’s start time and days of week.

7834

 

718;8*7

 

 

 

 

 

Hour = 00-12; minute = 00-59

 

 

 

 

 

Days = Position the cursor under the desired days

 

 

 

 

 

6)4)%8348-32

 

 

using the [] key to move forward, then press “1” to

 

 

 

 

 

 

 

select the day.

 

 

 

 

 

Press [] to continue.

 

 

 

 

8.

Enter the event’s stop time, AM/PM and days of

 

 

 

 

,,￿11%1

￿￿￿￿￿￿￿

 

week.

 

Refer to step 7 for available entries.

 

Press [] to continue.

 

 

 

 

9.

Enter the desired repeat option.

 

 

 

 

 

 

 

<

 

0 = no repeat

6%

-

 

 

1 = repeat schedule weekly

￿￿￿

 

 

 

2 = repeat schedule biweekly (every other week)

 

 

 

 

 

3 = repeat schedule every third week

 

 

 

 

 

4 = repeat schedule every fourth week

 

 

 

 

 

e.g., To make a schedule that happens everyday you

 

 

 

 

 

would select all days with a repeat count of 1. To

 

 

 

 

 

make a schedule that runs for one week then stops,

 

 

 

 

 

select everyday with a repeat count of 0.

 

 

 

 

10.

Select the randomize option, if desired.

 

 

 

 

 

 

 

 

 

0 = no; 1 = yes

￿=2(31￿==7>)

<

 

If selected, the schedule times will vary within 60

 

minutes of the “hour” time. For example, if a

 

 

 

 

 

schedule is set to start at 6:15pm, it will do so the

 

 

 

 

 

first time 6:15pm arrives, but on subsequent days it

 

 

 

 

 

will start anytime between 6:00 and 6:59 p.m.

 

 

 

 

 

Press [] to return to first prompt, then enter 00 to

 

 

 

 

 

quit.

 

 

 

 

– 33 –

Page 33
Image 33
First Alert FA130CP manual =231==7