Clearances mm | Fisher & Paykel CE604, CE302 guide

Installation instructions

Clearances

Drawings for illustration purposes only

A

7

D

C

B

C

E

Clearances (mm)

			CE302	CE604

	A	minimum clearance from rear edge of cutout to:	55	55
	A	nearest combustible surface
		nearest combustible surface
	B	minimum clearance from glass surface to:
	B	rangehood	650	650
		rangehood	650	650
	C	minimum clearance from side edges of cutout to:
	C	nearest combustible surface	65	85
		nearest combustible surface	65	85
	D	minimum clearance from benchtop to:
	D	overhead cabinet not directly above the cooktop	450	450
		overhead cabinet not directly above the cooktop	450	450
	E	minimum clearance below top of benchtop to:
	E	thermal protection barrier	65	92
		thermal protection barrier

Image 9

Fisher & Paykel CE604, CE302 installation instructions Clearances mm

Contents

Installation instructions Page Contents Installation Safety and warnings Important safety instructions Electrical Shock Hazard Operation and maintenance Never use your appliance as a work or storage surface Cooktop and cutout dimensions Installation instructions Clearances mm Clearances When you have installed the cooktop, make sure that Before you install the cooktop, make sure that Minimum clearance below cooktop base CE302 models Thermal protection barrier must be Turn the cooktop upside down and place it on a soft surface Fastening the cooktop to the bench CE302 models Applying the adhesive seal aroound the edges of the cooktop Fastening the cooktop to the bench CE604 models Power supply Connecting the cooktop to the mains power supply To be Completed by the Installer Final checklist Before using your new cooktop IntroductionAbout your new cooktop Cooking zone controls Using your cooktop Cookware Cooking guidelines General cooking tips What? How? Care and cleaning They don’t, however, affect Troubleshooting chart Troubleshooting Warranty and service Before you call for service or assistanceProduct details Page Page Page Page NZ AU