Fisher & Paykel CG905 installation instructions Care and cleaning, General advice, Enamelled parts

22

Care and cleaning

General advice

Maintenance Period	Description
Daily	Clean gas cooktop as per following
	instructions.
Monthly	Remove all burner parts, and clean using a
	non-abrasive detergent. Rinse in cold water,
	dry thoroughly, and replace.
	Clean the ignitor carefully, using a toothbrush
	and methylated spirits.
Every 3-4 years	Contact your local authorised gas Service
	Agent to perform a thorough check on all gas
	components on the gas cooktop.

Before cleaning, you must ensure that the cooktop is switched off. Clean the cooktop regularly – do not let stains become burnt on. Allow the appliance to cool down before cleaning.

Avoid leaving acidic substances (lemon juice, vinegar etc.) on the surfaces.

The control knobs may be removed for cleaning but care should be taken not to damage the seal.

Do not clean cooktop parts in a self-cleaning oven.

Do not use a steam cleaner to clean any part of your cooktop. For stubborn stains, see the ‘Cleaning chart’.

Enamelled parts

Clean the enamelled parts with a sponge and soapy water only or other non-abrasive products.

Dry preferably with a microfibre or soft cloth.

If acidic substances such as lemon juice, tomato sauce, vinegar etc. are left in contact with the enamel for a long time, they will damage the surface.

Stainless steel surfaces

Stainless steel parts should be rinsed with water and dried with a microfibre or soft cloth. Dry thoroughly to avoid leaving water marks. For extra shine on stainless steel, use a stainless steel polish.

Clean brushed stainless steel in the direction of the grain.

For persistent dirt, use specific non-abrasive products available commercially or a little hot vinegar.

Note: regular use could cause discolouring around the burners, because of the high flame temperature.