Fisher & Paykel CI604DT Installation instructions, Power supply, Connection diagrams, L N Pe

Installation instructions

Connecting the cooktop to the mains power supply

9

Important!

This cooktop must be connected to the mains power supply only by a suitably qualified person.

Before connecting the cooktop to the mains power supply, check that:

1the domestic wiring system is suitable for the power drawn by the cooktop.

2 the voltage corresponds to the value given in the rating plate

3the power supply cable sections can withstand the load specified on the rating plate.

To connect the cooktop to the mains power supply, do not use adapters, reducers, or branching devices, as they can cause overheating and fire.

The power supply cable must not touch any hot parts and must be positioned so that its temperature will not exceed 75oC at any point.

Power supply

CI604DT 6950W @220-240/380-415V 2N~ (30A)

CI754DT 7400W @220-240/380-415V 2N~ (32A)

CI905DT 9800W @220-240/380-415V 3N~ (42A)

Important!

Check with an electrician whether the domestic wiring system is suitable without alterations. Any alterations must only be made by a qualified electrician.

Connection diagrams

	CI604DT, CI754DT
Single-phase connection	Two-phase connection
220-240V~	380-415V 2N~

1

2		4
	3		5

L N PE

	2		4
1		3		5
L1	L2		N		PE

CI905DT

Single-phase connection	Three-phase connection
220-240V~	380-415V 3N~

1

2		4
	3		5

L N PE

	2		4
1		3		5
L1	L2 L3		N		PE