Using your cooktop’s special features 27
Using the timer as a minute minder
1Make sure the cooktop is turned ON. Note: you can use the minute minder even if you’re not using any cooking zones.
3Set the time while the small red light in the
bottom corner of the minute display is on. Hint: the minutes will scroll faster if you touch and hold – or + continuously.
2Touch the – and + controls of the timer
together. The minute minder indicator will start flashing and 00 will show in the
minute display.
4When the time is set, it will begin to count down immediately. The display will show the remaining time and the minute minder indicator will keep flashing.
If you are not using any cooking zones
You can use the timer as a minute minder even if you are not using any cooking zones. In this case, the cooktop will turn itself off 10 seconds after you have set the time, but the time will continue to count down. To change or cancel the minute minder setting, you will have to turn the cooktop back on first. See ‘To change or cancel a timer setting’.
When the set time is up
00 will flash and the timer will beep. Touch any control to stop the beeping. Remember, touching the ON/OFF control will turn the whole cooktop off!
