Fisher & Paykel GWLO8 If Your Smart Drive Beeps for Help, If the Machine Beeps, Continuously

IF YOUR SMART DRIVE BEEPS FOR HELP

Your Smart Drive is capable of diagnosing its own troubles. If your Smart Drive gives a short burst of beeps every 5 seconds it is telling you that it has a problem which YOU can solve using the checklist below.

MACHINE IS GIVING A SHORT
BURST OF BEEPS* AND...	POSSIBLE SOLUTIONS

* The short burst of beeps is the same sound your washer makes when you plug your machine in.

HOT water temperature light is flashing

COLD water temperature light is flashing

HOT and COLD water temperature lights are flashing

HIGH water level light is flashing

First rinse light or spin light is flashing

1.Hot faucet has not been turned on.

2.Inlet hose screens may be blocked.

3.Hot water supply is not hot enough to maintain the wash temperature you have selected. Select a lower wash temperature.

4.Inlet hoses connected the wrong way around.

1.Cold faucet has not been turned on.

2.Inlet hose screens may be blocked.

3.Faucets connected the wrong way around.

4.Cold water temperature exceeds recommended limits (See separate INSTALLATION INSTRUCTIONS).

1.The inlet hoses have not been turned on.

2.The drain hose is too low & the water is siphoning out of the machine. (See separate INSTALLATION INSTRUCTIONS).

3.Water flow is very low. Check screens on inlet hoses and water valves for any blockage.

1.The machine is overloaded and can not agitate. Ensure the machine is stationary. Remove clothes until the remaining clothes can move freely.

2.Remove the agitator. Check that no foreign object is trapped under the agitator

1.The machine has a suds build-up. (Too much detergent may have been used for the amount of soil in the load.) Wait for suds to dissolve. Rinse clothes using a deep rinse.

First RINSE or SPIN light is flashing as well as the SPIN SPEED light.

1.Wash load is out of balance. Ensure the machine is stationary. Manually redistribute the load. Check machine is level. (See separate INSTALLATION INSTRUCTIONS).

IF THE MACHINE BEEPS	1. Unplug machine from the wall. Wait 15 seconds,
CONTINUOUSLY	plug back in and operate machine.

2.If the fault re-occurs repeat step 1.

3.If the machine still will not work call your Authorized

Service Agent or Fisher & Paykel Dealer. 35