Manuals / Fisher & Paykel / Kitchen Appliance / Convection Oven

Fisher & Paykel OB24SDPX Setting The Cooking Only For The Cooking Functions

Models: OB24SDPX

1 56

Download 56 pages 11.63 Kb

Page 10

SETTING THE COOKING (ONLY FOR THE COOKING FUNCTIONS)

2

Programmer

Temperature	Function
knob	selector knob

SETTING THE COOKING (ONLY FOR THE COOKING FUNCTIONS)

NOTE: The temperature knob (potentiometer) turns to right and left only to symbols + and -. Forcing the turning could damage the temperature knob.

The temperature set is shown on the electronic program display and can be var- ied, with 5 °F (5 °C) intervals, by means of the temperature knob (potentiometer) or the program keys.

During cooking the oven temperature (°F or °C) is measured by a sensor inside the cavity and is shown on the program display until set temperature is reached. If set temperature is less than inside oven temperature, the display shows the set temperature.

➀

➁

or

➁

➂

1.SELECTING THE COOKING FUNCTION

Turn the selector knob to the cooking function required

The pre-set temperature appears on the program display. °F or °C flashes on the display for 3 seconds. The heating elements start cooking immedi- ately.

2.SETTING THE COOKING TEMPERATURE

Turn the potentiometer knob clockwise to increase the temperature or anticlockwise to reduce it.

The maximum temperature which can be set is 480 °F (250 °C) while the minimum temperature is 120 °F (50 °C).

					or use the program keys in the following way:
					The temperature can be changed when °F or °C is flashing on the display.
					2a. If °F or °C is not flashing press key 4 of the program.
					2b Press key 6 to increase the temperature or key 5 to reduce it.
					The maximum temperature which can be set is 480 °F (250 °C) while the
	I	I	I		minimum temperature is 120 °F (50 °C).
	I		I
	I	I	I		Note: When °F or °C becomes steady the value shown on the display indicates
		I	I
	I		I
					the oven cavity temperature until set temperature is reached. If set temperature
					is less than inside oven temperature, the display shows the set temperature.
4			5	6	Caution: If a temperature below the minimum value (120 °F or 50 °C) is set the
					system switches off automatically and OFF appears.
2a				2b	In this case repeat the procedure from point 2.

3.SWITCHING OFF

Turn the selector knob to position 0 (OFF). The program display shows the time.

10

Image 10

Fisher & Paykel OB24SDPX Setting The Cooking Only For The Cooking Functions, or use the program keys in the following way

Contents

Built-in oven Installation instructions and User guideInstructions dinstallation et Guide d’utilisation Four encastréIMPORTANT - PLEASE READ AND FOLLOW USING THE OVEN FOR THE FIRST TIME IMPORTANT PRECAUTIONS AND RECOMMENDATIONSUSER INSTRUCTIONS Oven controls control panelWARNING - VERY IMPORTANT NOTE NOTES ON OVEN WORKING how to use the self cleaning ovenGENERAL FEATURES USING THE OVEN FOR THE FIRST TIMEDEFROSTING FROZEN FOODS this is not a cooking function SELECTING THE FUNCTIONS figOVEN LIGHT this is not a cooking function CONVECTION COOKING WITH VENTILATIONBROILING TRADITIONAL CONVECTION COOKINGVENTILATED COOKING WITH DOUBLE BROIL VENTILATED BROILINGTake all the accessories out of the oven broiling pan and shelves This is not a cooking function but is only used to clean the ovenBefore starting the self cleaning cycle Clean any traces of liquid which have over- flowed➀ ➁ ➂ ➃ SELECTING F/C ON THE DISPLAYSETTING THE COOKING ONLY FOR THE COOKING FUNCTIONS or use the program keys in the following wayHOW TO START THE SELF CLEANING CYCLE What to do PROBLEMS ON STARTING AND DURING THE SELF CLEANING CYCLEWhat to do What to doACCIDENTAL INTERRUPTION OF THE SELF CLEANING CYCLE HOW TO STOP THE SELF CLEANING CYCLEWHAT TO DO WHEN THE SELF CLEANING CYCLE HAS FINISHED If the oven cavity temperature is higher than 570 F 300 CWhat to do ABNORMAL SITUATIONS AND/OR OPERATION PROBLEMSduring cooking or the self cleaning cycle What to doROASTING COOKING ADVICE STERILIZATIONIt is advisable to han- dle the oven accessories using oven gloves COOKING DIFFERENT DISHES AT THE SAME TIME3 STEP 1 STEP2 STEP 4 STEPSETTING THE TIME how to use the electronic programON SWITCHING ON FOR THE FIRST TIME OR AFTER A BLACK-OUT AUDIBLE SIGNALSetting TIMERSEMI-AUTOMATIC COOKING During cookingStarting cooking AUTOMATIC COOKINGSetting During cookingEXAMPLESOF PROGRAMMING AUTOMATIC COOKING CANCELLING A SET PROGRAMA U ➁ T O ENAMELLED PARTS cleaning and maintenanceGENERAL RECOMENDATION PAINTED PARTS AND SILK-SCREEN PRINTED SURFACESREMOVING THE OVEN DOOR OVEN SHELF INSTALLATION AND REMOVALREPLACING THE OVEN LIGHT fig Fig. 4.3bGENERAL INFORMATION INSTALLATION INSTRUCTIONSREPLACEMENT PARTS ELECTRICAL GROUNDING INSTRUCTIONSinstallation to the cabinet GENERAL INFORMATIONNo responsibility for lower trim dam CONNECT WITH COPPER WIRE ONLY electrical connectionL1 - N ELECTRIC DIAGRAML1 - L2 = L2 - NIMPORTANT - VEUILLEZ LIRE ET SUIVRE CONSIGNES ET RECOMMANDATIONS IMPORTANTES MODE D’EMPLOIUTILISATION DU FOUR POUR LA PREMIÈRE FOIS Commandes du four tableau de commandeATTENTION - REMARQUE TRÈS IMPORTANTE REMARQUES SUR LE FONCTIONNEMENT DU FOUR comment utiliser le four autonettoyantCARACTÉRISTIQUES GÉNÉRALES UTILISATION DU FOUR POUR LA PREMIÈRE FOISRecommandée pour SÉLECTION DES FONCTIONS figet après cinq minutes, un signal sonore se fait entendre pendant Recommandée pourRecommandée pour Recommandée pourRecommandée pour CUISSON AU GRILREMARQUES IMPORTANTES Retirez tous les accessoires du four lèchefrite et grillesFONCTION AUTONETTOYAGE Avant de démarrer le cycle d’autonettoyageSÉLECTION DE F/C SUR L’ÉCRAN D’AFFICHAGE ➀ ➁ ➂ ➃SEULEMENT POUR LES FONCTIONS DE CUISSON RÉGLAGE DE LA CUISSONou utiliser les touches du programmateur de la façon suivante COMMENT DÉMARRER L’AUTONETTOYAGE Que faire PROBLÈMES DE DÉMARRAGE ET DE FONCTIONNEMENT DU CYCLE D’AUTONETTOYAGE1. door s’affiche en continu Que faireINTERRUPTION ACCIDENTELLE DU CYCLE D’AUTONETTOYAGE COMMENT ARRÊTER L’AUTONETTOYAGEQUE FAIRE LORSQUE LE CYCLE D’AUTONETTOYAGE EST TERMINÉ Si la température de la cavité du four est supérieure à 570 F 300 CQue faire SITUATIONS ANORMALES ET/OU PROBLÈMES DE FONCTIONNEMENTlors de la cuisson ou de l’autonettoyage Que faireSTÉRILISATION AVERTISSEMENTCONSEILS DE CUISINE AVERTISSEMENTINCORRECT NIVEAU NIVEAU NIVEAU NIVEAUCUISSON AU GRIL CORRECTPREMIÈRE UTILISATION OU UTILISATION APRÈS UNE PANNE D’ÉLECTRICITÉ SIGNAL SONOREcomment utiliser le programmateur électronique RÉGLAGE DE L’HEURERéglage MINUTERIECUISSON SEMI-AUTOMATIQUE Au cours de la cuissonDémarrage de la cuisson CUISSON AUTOMATIQUERéglage Au cours de la cuisson11 12 102 EXEMPLES DE PROGRAMMATION DE LA CUISSON AUTOMATIQUEPIÈCES ÉMAILLÉES RECOMMANDATION GÉNÉRALEnettoyage et entretien PIÈCES PEINTES ET SURFACES IMPRIMÉES PAR SÉRIGRAPHIERETRAIT DE LA PORTE DU FOUR INSTALLATION ET RETRAIT DE LA GRILLE DU FOURREMPLACEMENT DE LA LAMPE DU FOUR fig Cran d’arrêtAVERTISSEMENT INSTRUCTIONS D’INSTALLATIONRENSEIGNEMENTS GÉNÉRAUX INSTRUCTIONS DE MISE À LA TERREinstallation à l’armoire RENSEIGNEMENTS GÉNÉRAUXPrenez soin de NE PAS soulever le four par la poignée de porte raccordement électrique RACCORDEMENT AVEC FIL DE CUIVRE SEULEMENT= 120 TERREL1 - L2 = 240 SCHÉMA ÉLECTRIQUEPage Page US CA Built-in oven user guide Published 03/2007 Part No. 599406 A Elba Part No