Care and cleaning
39
1 1
Catalytic panel
2 | lock stud |
retaining wire
Fit both catalytic panels.
Place each catalytic panel flush against the side wall, noting the position of the cutouts for the lamp and lock nuts.
Replace both side racks.
To replace the side racks, locate the top of the side rack into the two upper lock studs and gently push the retaining wire back under the lower lock stud.
Guard rail
Stop Notch
Shelf stop
Replacing a wire shelf
Replace shelving.
To replace a wire shelf, check the guard rail (as shown) to make sure the shelf is the right way up. Slide it horizontally back along the side racks ensuring it is level and the stop notch is facing down.