Installation instructions
Converting to a different gas type
11
This appliance is suitable for use with Natural gas or LPG gas (check the “gas type” sticker attached to the appliance). To convert from one gas type to another, you need to replace the injectors, and then adjust the minimum burning setting.
Replacing the injectors To replace the injectors:
Remove pan supports and burners from the cooktop.
Using a spanner, remove the injector (shown in figures following) and replace it with one according to the gas type (see the ‘Table for the choice of injectors’).
Fix the warning label (supplied with the conversion kit) at the back of the cooker, near the gas inlet connections. This label states that the gas cooktop has been converted for use with LPG gas / Natural gas.
Important!
If the cooker is suitable for use with Natural gas and must be converted for use with LPG gas, before connecting to gas main remove the appliance gas regulator and replace with test point adaptor.
If the cooker is suitable for use with LPG gas and must be converted for use with Natural gas, before connecting to the gas main remove the appliance test point adaptor and replace with gas regulator.
Notes:
-Gas regulator and test point adaptor are supplied with the appliance (packed with conversion kit)
-The burners are designed so that regulation of primary air is not required.
Injector
Injector
Figure 8 Auxiliary and | Figure 9 Triple ring wok burner |
