Fisher & Paykel OR60 Burner parts and pan supports, Replacing the burners, Care and cleaning

Care and cleaning

23

Burner parts and pan supports

You can remove and clean these parts with hot soapy water or non-abrasive detergents. Clean spills regularly before they become burnt on. Do not wash these parts in a dishwasher.

After cleaning, check that the burners and their flame spreaders are dry before replacing correctly.

It is very important to check that the burner flame spreader and the cap have been correctly positioned. Failure to do so can cause serious problems.

Note: To avoid damage to the electric ignition do not try to light the cooktop when the burners are not in place.

Replacing the burners

Carefully replace the burner parts as per the following figures.

Check that the ignitor is always clean to ensure trouble-free sparking. Clean it carefully with a toothbrush and methylated spirits.

Cap

Flame spreader

Ignitor

Figure 20 Auxiliary and semi-rapid burner parts Figure 21 Replacing the auxiliary and semi-rapid burners