Fisher & Paykel OR60 Anti-tilt bracket, Installation instructions, ++1515, min 105 max

8

Installation instructions

Anti-tilt bracket

Important!

This appliance must be restrained to prevent accidental tipping by fitting a bracket to the rear of the appliance and securely fixing it to the wall.

To fix the anti-tilt bracket:

After you have located where the cooker is to be positioned mark, on the wall, the place where the two screws of the anti-tilt bracket have to be fitted. Please follow the indications given in the drawing below.

Make two 8 mm diameter holes on the wall and insert the plastic plugs. Loosely attach the anti-tilt bracket with two screws.

Move the cooker to the wall and adjust the height of the anti-tilt bracket so that it can engage in one slot of the cooker back.

Tightly attach the anti-tilt bracket.

Push the cooker against the wall so that the anti-tilt bracket is fully inserted in one slot of the cooker back.

0

++1515

600 mm

365 235

min 105 max 120

Figure 3 Fitting the anti-tilt bracket