12

Installation instructions

Leak-testing and flame-testing the cooker

After installing the freestanding cooker and connecting the gas supply:

1Using a suitable leak detection fluid solution, check each gas connection one at a time by brushing the solution over the connection.

The presence of bubbles will indicate a leak. If there is a leak, tighten the fitting and then recheck for leaks.

Important! Do not use a naked flame to test for leaks.

2Adjust the test point pressure or supply pressure to the value that is appropriate for the gas type.

3Test the operation of the appliance:

Turn on the appliance gas controls and light each burner individually and in combination. Check for a well-defined blue flame without any yellow tipping. If any abnormality is evident, then check that the burner cap is located properly and the injector nipple is aligned correctly.

Check the minimum burner setting by quickly rotating the gas control dial from the maximum to the minimum position. The flame must not go out. If you need to adjust the setting, see ‘Adjusting the minimum burner setting’ following.

4If satisfacfory performance cannot be obtained, the installer shall check the installation and notify the local gas supply authority for a gas supply problem, or if it is an appliance problem, our Customer Service Centre should be called to obtain the nearest authorized Service Agent.

Converting to a different gas type

This appliance is suitable for use with Natural gas or LPG (check the “gas type” sticker attached to the appliance). To convert from one gas type to another, you need to replace the injectors, and then adjust the minimum burning setting.

Replacing the injectors

1Remove the trivets and burners from the cooktop.

2Using a spanner, remove the injectors (shown in Figs. 14-15-16 following) and replace them with ones according to the gas type (see the ‘Table for the choice of injectors’).

3Fix the warning label (supplied with the conversion kit) at the back of the cooker, near the gas inlet connections. This label states that the gas cooktop has been converted for use with LPG/ Natural gas.

Adjusting the minimum burner setting

4Follow the instructions on Page 14, ‘Adjusting the minimum burner setting’.

Important!

If you are converting the cooker from Natural gas to LPG,remove the gas pressure regulator before connecting the cooker to the gas supply and replace with the test point adaptor supplied with the conversion kit.

If you are converting the cooker from LPG to Natural gas, remove the test point adaptor before connecting the cooker to the gas supply and replace with the gas pressure regulator supplied with the conversion kit.

Notes:

- The burners are designed so that regulation of primary air is not required.

Page 13 Page 15
Page 14
Image 14
Fisher & Paykel OR90SDBGFX Leak-testing and flame-testing the cooker, Converting to a different gas type
Page 13 Page 15

OR90SDBGFX specifications

Fisher & Paykel has long been synonymous with innovative and high-quality kitchen appliances, and the OR90SDBGFX oven is a stellar example of their commitment to excellence. This freestanding range offers a blend of advanced technology, stylish design, and practical functionality, making it an ideal choice for any modern kitchen.

One of the standout features of the OR90SDBGFX is its large 90-litre capacity oven. This spacious design allows for multiple dishes to be cooked simultaneously, making family meals and gatherings a breeze. The oven is equipped with six cooking functions, including bake, grill, and fan-forced modes, giving users the versatility to prepare a wide variety of dishes to perfection. The self-cleaning function is an added convenience that helps maintain the oven's pristine condition with minimal effort.

The OR90SDBGFX also incorporates Fisher & Paykel's innovative AeroTech technology, which ensures consistent cooking temperatures throughout the oven. This feature minimizes temperature fluctuations, allowing for even baking and roasting results. The dual fan system further improves heat distribution, making it easier to achieve desired outcomes whether you're baking delicate pastries or roasting large cuts of meat.

Stylish and durable, the exterior of the OR90SDBGFX features a sleek stainless steel finish that not only enhances its aesthetic appeal but also ensures longevity. The integrated wok burner offers high-powered cooking options, perfect for Asian-inspired dishes and stir-fry. With five burners in total, home chefs can enjoy the flexibility of using multiple pots and pans at once.

Another notable characteristic of this range is the intuitive control panel featuring modern dials and an easy-to-read display. Precise temperature control and multifunction settings make cooking more enjoyable and accessible for both novice cooks and seasoned chefs. Additionally, the range comes standard with safety features such as flame failure protection and a cooling fan, ensuring peace of mind during cooking.

Fisher & Paykel thoughtfully designed the OR90SDBGFX to cater to the needs of today's culinary enthusiasts. Its combination of significant capacity, advanced cooking technologies, stylish design, and user-friendly features makes it an outstanding choice for any kitchen renovation or upgrade. Whether you're preparing everyday meals or hosting dinner parties, the OR90SDBGFX delivers unparalleled performance and reliability, embodying the brand's commitment to quality and innovation.
Top Page Image Contents