32
Care and cleaning
Replacing the triple-ring wok and dual burners
Carefully replace the burner parts as per the following Figs.
Fit the flame spreader to the housing as shown by the arrow in the
Check that:
the ignitor is always clean to ensure
The probe is always clean to ensure correct operation of the safety valves (some models only) Note: both the ignitor and probe must be very carefully cleaned using a toothbrush and methylated spirits (see Fig.29).
S | IgnitorS |
Ignitor | |
| ProbeT |
T |
|
Probe |
|
| Fig. 36b Correct positioning of |
| flame spreader - dual burner |
Fig. 36a Correct positioning of flame spreader -
ACap
RingB
Fig. 37 Correct positioning of cap and ring -
Fig. 38 Incorrect and correct positioning of cap and ring -