![](/images/new-backgrounds/1076561/7656131x1.webp)
14
Using your appliance
Setting and adjusting the time
After connecting your appliance or after a long period without it being connected to the mains, the “12:00” button will flash on the display.
To set the time on the clock | Display |
■Set the time using the + and - buttons then validate by pressing the button.
1 2 : 0 0
0 6 : 3 0
When the time has to be changed | Display |
■
■
■
Press the button then press
twice. The time will flash. Program the new time (e.g. 7:30) using the + and - buttons.
Validate by pressing .
A beep will be emitted to confirm that the new time has been set.
0 6 : 3 0
0 7 : 3 0
Adjusting the contrast
Programming | Display |
■
■
Press the button then a few seconds later press
, until the indication
Adjust the contrast using the + or - buttons and validate with the button.
Timer function
Programming | Display |
■
■
You can program the “Timer” function of your oven. Press the button then
.
Adjust the programming time using the . The display shows the time again but the countdown starts.
■Once the time has ended, the timer emits a series of beeps to warn you. These beeps can be stopped by pressing any button.