![](/images/new-backgrounds/1076561/7656117x1.webp)
Two installation options:
Option ‘A’ - oven only (overall height 457 mm) Option ‘B’ - oven + lower trim kit accessory
(overall height 478 mm)
Note: If you are installing an appliance directly over another, you have the option of using the supplied black metal shelf cover to conceal the shelf front that would be visible between the two appliances. This needs to be fitted before
Installation instructions | 7 |
|
50 |
| 50 |
| 20 | |
|
| ||||
10 |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
the lower trim kit and/or appliance is installed. Refer to the instructions packed with the shelf cover accessory kit.
450 |
|
| 550 |
|
|
|
| ||
(option 'A') | 550 min. | min. | ||
470 |
| |||
|
| |||
|
|
|
| |
(option 'B') |
|
|
|
|
|
|
| 560 |
|
| 550 | 400 |
450 |
|
|
(option 'A') |
| 597 |
470 |
| |
|
| |
(option 'B') |
|
|
560 | 445 |
|
Lower trim
(optional accessory, purchased separately)
23
457 (option 'A') 478 (option 'B')
Important!
If you choose Installation option B, you will need to install the lower trim kit BEFORE you install the appliance. Refer to the instructions packed with the lower trim kit.
Choosing the location
The diagrams above determine the dimensions of a unit where you will be able to install your oven. This appliance can be installed as an under the counter or column oven.
Recessed fitting
Centre the oven in the unit to guarantee a minimum distance of 20mm with the adjacent unit. The recessed unit must be made of
1)Make a Ø 2 mm hole in the wall of the unit to avoid the wood splitting.
2)Fasten the oven with the 2 screws.
Note: To ensure that your installation is compliant, do not hesitate to contact a household appliance specialist.
Important!
We accept no liability in the event of an accident or incident resulting from grounding that is non- existent, faulty or incorrectly fitted.
If the electrical installation in your household requires modification for you to connect your appliance, contact a qualified electrician.
If the oven presents any anomaly, disconnect the oven from the power supply or remove the fuse from the oven connection line.