COPYING A T APE
You can copy recordings (such as home videos) from one
tape to another using two VCRs.
1Connect the VCRs as shown.
2Insert the recorded cassette into VCR 1.
3Insert a blank tape into VCR 2.
4Set the desired recording speed on VCR 2.
5Turn on the TV and set it to channel 3 or 4.
If you use this model as VCR 2 to record:
œPress the INPUT button on VCR 2 to select the rear
input jacks.
The AV indicator “L1” is displayed instead of a channel
number.
6Press the TV/VCR button on VCR 2 to select the
VCR mode.
7Place VCR 2 in the record/pause mode.
8Press PLAY on VCR 1.
9When the tape in VCR 1 has reached the desired
point, press (release) PAUSE/STILL on VCR 2.
Recording begins.
FPress STOP (or STOP/EJECT on the front panel) on
both VCRs when finished.
MAINTENANCE

Head Care and Cleaning

œThis VCR has a built-in automatic head cleaner. Under
normal conditions, the heads should not require
additional cleaning. If you suspect a problem, contact a
factory-authorized service center.

Cabinet Cleaning

œClean the outside of the cabinet with a clean, soft cloth,
moistened with lukewarm water and wrung dry.
DO NOT USE SOLVENTS OR OTHER TYPES OF CLEANSERS. THESE CHEMICALS CAN CRACK OR
DISCOLOR THE CABINET.
VIDEO TO TV
OUT
IN
AUDIO
VIDEO
OUT
AUDIO
VCR 1:To play back VCR 2:To record
Audio connection cable
(not supplied)
Video connection cable
(not supplied)
TV
SC4/UF (FVH-E420 GB) Wed. Jan. 26/2000

35