CHANGING THE MENU LANGUAGE
English, Spanish or French can be selected by the user.
œTurn on the power (TV and VCR).
œSet the TV to channel 3 or 4.
œIf the VCR indicator is off, press the TV/VCR button
on the remote control.
The VCR indicator lights.
1Press the MENU button.
The main MENU appears.
2Press the ù (or û) button to select the Language
select option, then press the OK button.
3Press the ù (or û) button to select the language of
your choice, then press the OK button.
The Language select menu disappears, and the
on-screen menu language has been selected.
PROGRAMMING CHANNELS
Once the initial setup is completed, the channels can be
programmed again. This may be necessary if you are
switching from cable service to antenna reception.
NOTES:
œMake sure the antenna or cable connections are
correct. (See pages 9 and 10.)
œIf the input source is set to L1, press the INPUT button
on the remote control until the indicator panel shows a
channel number.

Channel Programming

1Follow the steps in Before starting above.
2Press the MENU button.
The main MENU appears.
3Press the ù (or û) button to select the VCR setup
option, then press the OK button.
The VCR setup menu appears.
CATV/TV@@@@@@@zCATV@TV
Cable@box@@@@@zNo@@@Ch02
Child@Lock@@@@@On@@zOff
Off@timer@@@zOff@2Hr@6Hr
[ùû]†Option
[<>]†Select@@@[MENU]†TV
4Press the ù (or û) button to select the CATV/TV
option, then press the > (or <) button to select
“CATV” (if you subscribe to a cable TV service) or
“TV” (for normal broadcast reception through an
antenna).
The CATV indicator “C” displayed on the indicator
panel means that the cable TV system is selected.
5Press the MENU button twice.
The main MENU appears.
6Press the ù (or û) button to select the Auto tuning
memory option, then press the OK button.
The VCR programs all unscrambled channels that
are available in your area into the tuner memory.
The “Auto tuning memory” message is displayed
while the channels are automatically set.

Before starting

BASIC OPERATION
SC4/UF (FVH-E420 GB) Wed. Jan. 26/2000

20