INSTALLATION

CONNECTING THE AC POWER CORD

This projector uses nominal input voltages of 100 ~ 120 V AC. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.

Consult a sales dealer or service station if you are not sure of the type of power supply being in use.

Connect the projector with the peripheral equipment before turning the projector on. (Refer to page 14 ~ 17 for connection.)

1

Connect the AC Power Cord (supplied) to the Power

 

Cord Connector on the projector.

2

Connect the AC Power Cord to the AC outlet.

POWER

CORD

CONNECTOR

AC POWER CORD

Projector side (Female)

Connect to the Power Cord Connector on the projector.

AC Outlet side (Male)

Ground

CAUTION

For the safety, unplug the AC Power Cord when the appliance is not used.

Connect the AC Outlet.

11