Fisher PLC-XR70N manual 35

VIDEO MODE

SELECTING COLOR SYSTEM

1	Press the MENU button and the ON-SCREEN MENU will appear.
	Press the POINT LEFT/RIGHT buttons to select SYSTEM and
	press the SELECT (REAR CLICK) button. Another dialog box
	VIDEO SYSTEM Menu will appear. (The display also appears by
	pressing the SYSTEM button on the Front Control or the Remote
	Control Units.)
2	Press the POINT DOWN button and a red-arrow icon will appear.
	Move the arrow to "Auto", and then press the SELECT (REAR

CLICK) button.

Auto

The projector automatically detects the incoming Video system, and adjusts itself to optimize its performance.

When the Video System is PAL-M or PAL-N, select the system manually.

PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N

If the projector cannot reproduce the proper video image, it is required to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, or PAL-N.

This box indicates the system being selected.

SELECTING VIDEO SOURCE

This projector can detect the signal from the video equipment with component video signal, like DVD player. When connecting to those equipment, select the type of Video source in VIDEO SOURCE Menu.

1	Press the MENU button and the ON-SCREEN MENU will appear.
	Press the POINT LEFT/RIGHT buttons to select VIDEO SOURCE
	and press the SELECT (REAR CLICK) button. Another dialog
	box VIDEO SOURCE Menu will appear.
2	Press the POINT DOWN button and a red-arrow icon will appear.
	Move the arrow to the system that you want to select, and then
	press the SELECT (REAR CLICK) button.
	Video	When the video source is from VIDEO, S-VIDEO, or
		BNC terminal, select "Video" in VIDEO SOURCE
		Menu.
		When connecting the video equipment through
	Y, C
		VIDEO-Y and VIDEO-C terminals to the projector,
		select "Y, C" in VIDEO SOURCE Menu.
		When connecting the video equipment on VIDEO-
	Y, Cb,, Cr
		Y, VIDEO-Cb, and VIDEO-Cr terminals to the
		projector, select "Y, Cb, Cr" in VIDEO SOURCE
		Menu.

This box indicate the Video source being selected.

35