APPENDIX

MOUSE/KEYBOARD CONNECTION

This projector equips the Mouse/Keyboard Cables in the Storage Cabinet (left side), and the Mouse/Keyboard Terminals on the Front Terminal. Connecting these cables and terminals enable you to control the computer easily.

1

2

3

4

Connecting Mouse/Keyboard to the Projector

Connect the Mouse/Keyboard Cable(s) in the Storage Cabinet (left side) to your computer as the figure below. Be sure to connect the cable(s) corresponding with your computer.

Connect a Mouse or a Keyboard to the Mouse/Keyboard Terminal on the Front Terminal. Be sure to connect to the terminal corresponding with the input device.

Connect the computer to the COMPUTER IN 1 terminal(s). Refer to page 14 and 15 for the connection.

When the steps 1, 2, and 3 are finished, switch the projector on before turning the computer on.

Keyboard of IBM-Compatible

Mouse of IBM-

Keyboard and Mouse of Macintosh

Compatible

Computer

Computer

Computer

 

To the Macintosh-Keyboard /

To the IBM-Keyboard

To the IBM-Mouse

Mouse Terminal

Terminal

Terminal

Caution

 

 

Be sure to connect the

Mouse/Keyboard Cables corresponding with your computer. And be sure to connect to the

Mouse/Keyboard Terminals corresponding with your input devices.

Cable Slot

When Connecting the computer to the Rear Terminal, cut Cable Slot(s) and run through the cables.

u Refer to page 14 and 15 for connecting the computer to the projector.

To COMPUTER IN 1 terminal

KEY BOARD

MOUSE

MAC

To AUDIO 1 To COMPUTER 1

 

Audio Cable

VGA Cable

 

(not supplied)

(supplied)

To a Keyboard or a Mouse

To a Keyboard terminal

 

terminal of IBM-Compatible

of Macintosh Computer

 

Computer

 

MAC/VGA

 

 

 

 

Adapter

 

 

(supplied)

 

To a Audio

 

 

Output

To a Monitor

 

terminal

Output

terminal

IBM-Compatible Computer or

Macintosh Computer

*Adapter is used for Macintosh computer. Refer to the page 15.

40