Assembly
12 |
| |
Inner Shock Half |
| |
Outer | Fender | |
Shock | ||
| ||
Half |
|
•Fit and hold an inner shock half to the inside of a handlebar.
•Fit and hold an outer shock half to the outside of the same handlebar.
•Make sure the top ends of the shock halves fit under the fender.
13
Front Axle
•Slide the front axle through the hole in the shock halves and handlebar.
14 | Front Wheel |
|
Wheel Bushing
•Fit a wheel bushing into the hole in the center of the front wheel.
•Repeat this procedure to fit another wheel bushing into the hole on the other side of the front wheel.
15 | Hubcap | |
Front Wheel | ||
|
•Fit and hold the hubcaps to each side of the front wheel.
•Make sure the posts on the inside of the hubcaps fit into the indentations on the front wheel, so that the hubcaps lay flat against the wheel.
16
Front Wheel
Front Axle
•Position the front wheel between the handlebars.
•Slide the front axle through the front wheel.
17 | Outer Shock Half | Fender |
|
| |
Inner |
|
|
Shock |
|
|
Half |
|
|
|
| Front Wheel |
•Fit and hold an inner shock half to the inside of the exposed handlebar.
•Fit and hold an outer shock half to the outside of the same handlebar.
•Make sure the top ends of the shock halves fit under the fender.
12