Assembly
17 | Tab |
Cowling | |
Exhaust |
|
Pipe |
|
| Slot |
•Insert the tab on the exhaust pipe into the slot in the cowling, as shown.
•Push the exhaust pipe down to “snap” it into place.
18
Bubble Blower
Connector
Rectangular
Hole
Bottom View
•Turn the vehicle frame over.
•Fit the bubble blower connector down through the
rectangular hole in the vehicle body. | 12 |
|
19
Bubble
Blower
Bottom View
•Fit the bubble blower to the underside of the vehicle frame, as shown.
•Insert six screws through the bubble blower and into the vehicle frame. Tighten the screws with a Phillips screw- driver. Do not
20 | Bubble Blower Connector |
| |
| Motor Harness |
| Connector |
IMPORTANT! There are three electrical connections to be made on this product. All three electrical connections must be made in order for your product to function properly.
Please follow these instructions carefully.
•Turn the vehicle frame upright.
•Fit the bubble blower connector to the motor harness connector. This is the second electrical connection.
Note: If the bubble blower connector will not plug into the motor harness connector, turn it over and try again! Do not force the bubble blower connector into the motor harness connector.
