Behind the Refrigerator

Safety

Be careful when moving the refrigerator away from the wall. All types of floor coverings can be damaged, particularly cushioned coverings and those with embossed surfaces.

Pull the refrigerator straight out and return it to position by pushing it straight in. Moving the refrigerator in a side direction may result in damage to the floor covering or refrigerator.

When pushing the refrigerator back, make sure you don’t roll over the power cord or icemaker supply line.

Instructions Operating

Light Bulb Replacement

To replace a burned-out bulb, unplug the

Turning the control to the OFF position does not

refrigerator from its electrical outlet,

remove power to the light circuit.

remove the light shield, unscrew the bulb

 

when cool and replace it with an appliance

 

bulb of the same or lower wattage.

 

Preparing for Vacation

Instructions Installation

For long vacations or absences, remove food and unplug the refrigerator. Move the freezer control to the OFF position, and clean the interior with a baking soda solution of one tablespoon (15 ml) of baking soda to one quart (1 l) of water. Leave the doors open.

Move the icemaker feeler arm to the STOP (up) position and shut off the water supply to the refrigerator.

If the temperature can drop below freezing, have a qualified servicer drain the water supply system to prevent serious property damage due to flooding.

Instructions

Preparing to Move

If the doors need to be removed, see the

Be sure the refrigerator stays in an upright

Removing the doors section.

position during moving.

Secure all loose items such as grille, shelves

 

and drawers by taping them securely

 

in place to prevent damage.

 

13

Troubleshooting Tips

Customer Service

Page 13
Image 13
GE 24 owner manual Troubleshooting Tips Customer Service, Instructions