Storage
Care
Press
Buttons 
The pad is machine washable. Wash the pad separately in cold water on the gentle cycle. Do not use bleach. Tumble dry sep- arately on low heat and remove promptly. The frame, tray and toybar may be wiped clean using a mild cleaning solution and a damp cloth.
Clips
• Fit the bottom of the remote into the cupped portion of the holder.
• Push to “snap” the top of the remote 
under the holder clips.
•Turn the toybar back to its storage position.
•Press the button on the inside of each housing and push the rear legs toward the front legs. Stand the frame against a wall for storage.
Upper | Elastic | |
Pad | ||
Loops | ||
|
Lower
Pad
Elastic
Loops
Restraint
Belts
To remove the pad:
•Unhook the four elastic hooks from the pegs on the seat back and bottom.
•Push the restraint belts back through the slots in the pad.
•Slide the upper pad pocket off of the seat back.
•Slide the lower pad pocket off of the seat bottom.
To replace the pad:
• Refer to Assembly steps 19 - 21.
Note: This product has no consumer serviceable parts. Do not take this product apart.
15
