Assembly
Frame Hub
Push
Button
Swing
Tube
Front
of Seat 
Curved
21 Front
Base
•Position the seat assembly so that the front of the seat is toward the curved front base.
•While pressing the buttons on the swing tubes, insert them into the frame hubs. Push the swing tubes up until the buttons “snap” into the hole in the frame hubs.
•Push down on the seat to be sure the seat is secured in both frame hubs.
Frame
Hubs
22
#8 x 11/4” Screw - 2
Shown Actual Size
•Insert a #8 x 11/4" screw through each frame hub and into the swing tubes. Tighten the screws with a Phillips screw- driver. Do not
•Again, push down on the seat to be sure the seat is secured to both frame hubs.
Slot
Pad
Slot
Waist Belts
23
•Fit the pocket on the back of the pad onto the seat back.
•Fit the waist belts through the smaller slots in the pad.
Pad
Elastic
Loops
Crotch
Belt
Holes
24
• Lift the bottom of the pad.
•Insert the pad elastic loops through the holes in the seat bottom.
•Insert the crotch belt through the slot in the pad.
•From under the seat, fit the elastic loops onto the tabs on the seat bottom.
9
