Problems & Solutions
Problem |
| Solution | |
No image on parent unit screen | Press the display button. You can also change the voice acti- | ||
| vated setting to | . The video screen automatically turns on | |
| when baby makes noise. | ||
|
| ||
| Batteries in parent unit are weak or dead. Use AC adaptor/ | ||
| charger and to charge the battery and as a power source. | ||
|
| ||
| Camera lens is obstructed. Adjust the camera angle. | ||
|
| ||
Parent unit beeps and out of | Parent unit is out of range of camera. Move parent unit closer | ||
range screen displays . | to camera. |
| |
| Note: Range varies depending on surrounding conditions such | ||
| as noise levels, physical obstructions and signal interference. | ||
| Under optimal conditions, the range is up to 450 feet. | ||
|
| ||
| Turn the parent unit to change the orientation. | ||
|
| ||
| Camera power is off. Turn camera power on. | ||
|
| ||
| Do not block the internal antenna on parent unit. | ||
|
| ||
| Loose power cord connection and camera power is off. Check | ||
| camera docking station power cord | ||
|
| ||
| No power to wall outlet and camera power is off. Make sure | ||
| light switch that controls power flow to wall outlet is on. | ||
|
| ||
| Power is off because circuit breaker for room is off. Make sure | ||
| house fuses and circuit breakers are on. | ||
|
| ||
Parent unit power button | Parent unit power is off. Turn parent unit power on. | ||
does not light |
|
| |
Battery pack in parent unit is weak or dead. Use AC adaptor/ | |||
| |||
| charger to charge the battery and as a power source. | ||
|
| ||
| Power is off because circuit breaker for room is off. Make sure | ||
| house fuses and circuit breakers are on. | ||
|
| ||
| No power to wall outlet and power is off. Make sure light switch | ||
| that controls power flow to wall outlet is on. | ||
|
|
| |
33
