Assembly
Pegs
13 | Elevator |
•Fit the pegs on the end of the elevator crane into the grooves in the other elevator. Push to “snap” in place.
Hint: The elevator is designed to fit on the elevator crane one way. If it does not seem to fit, turn it around and try again!
5
6 
3
2
4 | 1 |
| |
| 1 |
| 7 |
|
14 | 1 | 1 |
| ||
|
|
•Before applying the labels, wipe the surface with a clean, dry cloth to remove any dust or oils.
•Place the labels exactly as shown in the illustration and avoid repositioning the labels.
•After applying a label, rub it fi rmly with a clean dry cloth, starting at the center, to remove any air bubbles.
9
