PRECAUTIONS
In case of malfunction
Do not use the camera if smoke or a strange odour comes from the unit, or if it seems not to function correctly. Disconnect the power supply immediately, and consult your dealer (or a Sanyo Authorized Service Center).
Do not open or modify
Do not open the cabinet, as it may be dangerous and cause damage to the unit. For internal settings and repairs, consult your dealer (or a Sanyo Authorized Service Center).
Do not put objects inside the unit
Make sure that no metal objects or flammable substances get inside the camera. If used with a foreign object inside, it could cause a fire,
If water or a liquid gets inside the camera, disconnect the power supply immediately, and consult your dealer (or a Sanyo Authorized Service Center). Be careful to protect the camera from sea water, etc.
Be careful when handling the unit
To prevent damage, do not drop the camera or subject it to strong shock or vibration.
Install away from electric or magnetic fields
If installed close to a TV, radio transmitter, magnet, electric motor, transformer, or audio speakers the magnetic field they generate will distort the image.
Protect from humidity
To prevent damage to the camera, do not install it where there is greasy smoke or steam or where the dampness may get too high.
Protect from high temperatures
Do not install close to stoves, or other heat generating devices, such as spotlights, etc., or where it could be subject to direct sunlight, as that could cause deformation, discoloration or other damage.
Be careful when installing close to the ceiling, in a kitchen or boiler room, as the temperature may rise to high levels.
Install where the temperature range will stay between
Cleaning
Dirt can be removed from the housing by wiping it with a soft cloth. To remove stains, wipe with a soft cloth moistened with a soft detergent solution and wrung dry, then wipe dry with a dry soft cloth.
Do not use benzine, thinners or other chemical products on the housing, as they may cause deformation and paint peeling. Before using a chemical cloth, make sure to read all accompanying instructions. Make sure that no plastic or rubber material comes into contact with the housing for a long period of time, as that may cause damage or paint peeling.
Mounting Surface
The mounting surface material must be strong enough to secure the camera. Plaster- board without a backing plate is not recommended.
English 3
