SETTINGS
The illustration shows the factory default settings for the switches in the camera setup section.
When changing the settings and adjustments for this camera, loosen the camera unit screw (A) and remove the lens unit in the direction of the arrow. When changing the DIP switch settings, take care when making the settings and adjustments because power is still being supplied to the camera.
(A)
| Control name | Position |
1 | Color and Black/White level switch (C/B) | LOW |
| (Normal: LOW/High sensitivity: HI) | |
|
| |
23 | High speed electronic shutter setting (ES) | 1/60 sec. |
4 | Aperture compensation setting (AP) | SHRP |
| (Sharp: SHRP/Normal: NORM) | |
|
| |
5 | Backlight compensation setting | OFF |
| (ON (MULT)/OFF) | |
|
| |
6 | Backlight compensation setting | OFF |
| (ON (CENT)/OFF) | |
|
| |
7 | White balance switch (WB) and color | ATW |
| (R or B) adjustment volume | |
|
| |
8 | Synchronization setting (SYNC)(LL/INT) | INT |
9 | Line phase adjustment (PHASE) | adjustable |
F | Lens iris level adjustment | adjustable |
|
|
|
F
VR121
9
7
C/B | ES |
| AP | WB | SYNC | ||
HI | 1 | 2 | SHRP | ON | ON | MANU | LL |
ON |
|
|
|
|
|
| |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
LOW | OFF | OFF | NORM | OFF | OFF | ATW | INT |
1 2 3 4 5 6 7 8
6 English
