ADJUSTMENT
Adjusting the lens
Model: VDC-D2184VA
1
2
4
3
AModel: VDC-D1184VA
C
B C
C
Once the camera has been installed, adjust the lens section.
1Tighten the pan adjustment screw.
Model:
Loosen the pan adjustment screw, adjust the panning position of the lens and then
Model:
Remove the lens unit A from the pan chassis, loosen the pan adjustment screw B, turn the chassis to adjust the panning position to a position where one of the three screw holes C is visible, and then
2Loosen the tilt adjustment screw, adjust the tilting position of the lens and then
3Loosen the zoom lever screw, turn the zoom lever counterclockwise to determine the zoom position while viewing the camera images on the monitor, and then
4Loosen the focus lever screw, turn the focus lever counterclockwise to determine the focus position while viewing the camera images on the monitor, and then
Note: Be careful not to touch the lens section when changing the angle of the camera.
English 11