Acoustic Imaging Blender Aura™ | Control Panel Overview - Continued |
LED Display
The LED Display is your guide for navigating through the Play, Edit and
Tuner modes.
1 Play mode: The display shows your present program location.
2 Edit mode: Shows the status of a selected parameter.
3 Tuner mode: Displays the note name and calibration frequency of the tuner.
In Play mode, the Aura’s LED displays the number of the program you are in.
Play | to 88 = Programs 1 through 50 |
In the Edit mode the Aura’s display tells you the status of a selected Parameter.
Select 88 = no digital Sound Image, just pickup
88 to 88 = Permanent Factory Preset Sound Images
to 88 =
replaced with newer Sound Images imported from www.fishmanaura.com
Aura - Bass, Mid, Trebleto 88 = 1 to 12 dB boost 88 to 88 = 1 to 9 dB cut 88 = flat
Blend 88 | = pickup only |
88 | = 87% pickup |
88 | = 75% pickup |
| = 62.5% pickup |
| = 50/50 pickup/Sound Image |
| = 62.5% Sound Image |
| = 75% Sound Image |
| = 87.5% Sound Image |
88 | = Aura Sound Image only |
to 88 = 1 to 12 dB boost 88 to 88 = 1 to 9 dB cut 88 = flat
Pickup Phase88 | = |
|
88 | = inverting | 12 |
88 = off
88 to88 = recommended for Chords (strumming) 88 to88 = recommended for Lead
(flat picking, finger style)
Level88 = no boost or cut
88 to = 1 to 3 dB boost
88 to88 = 1 to 9 dB attenuation
Tuner
| = A 440 Hz calibration frequency |
| (dot in upper left corner) = Mute disengaged |
A | = A |
A | = A# |
| = B |
C | = C |
C | = C# |
| = D |
| = D# |
| = E |
| = F |
| = F# |
| = G |
| = G# |
Factory Default Settings
= all programs and parameters can be returned to factory default settings (excepting user downloaded Sound Images).
TO RESET : Hold down both UP and Feedback Cancel switches for over 2 seconds while plugging in 9V power.