Fluke 807-0115 manual Inline probe ASE, Csu/Dsu

Visual UpTime Select

ASE model 807-0104

V.35 inline probe ASE

W i t h L i n k S a f e c a p a b i l i t i e s

Key features

•Inband management capabilities

•LinkSafe technology

•Multi-Protocol or IP Transport software

•Service Level Agreement (SLA) metrics

•Voice over IP (VoIP) analysis capability

•Application analysis capability

•LMI spoofing

•LAN management port

•Power loss detection

•Realtime events

The Visual UpTime® Select™ V.35 LinkSafe™ inline probe ASE is deployed inline on a T1 access line, typically between a CSU/DSU and customer premises equipment. This ASE supports Multi-Protocol software for deployment in standard frame relay or HDLC networks and IP Transport software for deployment in frame relay or HDLC-based networks that use IP switching.

The V.35 inline probe ASE supports V.35 connectiv- ity through a V.35 Data Terminal Equipment (DTE) interface on the network side and Data Communica- tions Equipment (DCE) interface on the user side.

The ASE operates at data rates up to 2.048 Mbps, deriving timing from the network-side and sourcing timing on the user side. It also includes LinkSafe technology to protect circuit integrity in case of an ASE outage, as well as power failure notification.

V.35 inline probe model 807-0104 front view

V.35 inline probe model model 807-0104 rear view

	Optional LAN
	Connection
Access Line		LAN
WAN
CSU/DSU	Inline ASE	CPE Router
		Visual UpTime
		Select Server
V.35 inline probe model 807-0104 position on network

Technical Data