Fluke 807-0115 manual OC-3c inline probe ASE specifcations, Hec

OC-3c inline probe ASE specifcations

General	Dimensions	1 EIA unit (1.75”) high x 19” wide rack-mountable
		chassis
	Weight	10 lbs.
	Data Rate	to 155 Mbps synchronous
	Timing Mode	Derived externally from the network.
Environment	Operating Temperature	0o to +40oC (+32o to +104oF)
	Storage Temperature	-20oto +55oC (-4oto +131oF)
	Clearance Requirement	Minimum of 3” (7.62 cm) space on sides.
	Operating/Storage Humidity	10% to 90% non-condensing
Power Requirements	Input	100 to 240 VAC
	Frequency	50/60 Hz
	Input Current Rating	0.5 amps
	Bypass	5 volt 1 amp DC
Network Interface	Line Rate	155.52 Mbps
	Line Mode	SONET or SDH
	Cell Delineation	HEC
	Cell Scrambler	Enable or Disable
	Connectors	2 Sff Duplex-LC, Network Tx and Rx, CPE Tx and Rx
	Wavelength	1274 nm/1356 nm
	Tx Average Output Power	-11dBm (typical) Measured with single mode cable
	Rx Sensitivity	-33dBm (typical)
Serial Port Interface	Baud Rate	57600, 19200, or 9600 bps
	Parity	8 data bits, no parity
	Stop Bit	1 stop bit
	Electrical Format	EIA RS-232, DTE
	Connector	9-pin D, male per EIA-574
Ethernet 10/100BaseT	Bite Rate	10 or 100 Mbps
Interface
	Connector	8-pin modular jack: RJ-48

Compliant with Bellcore GR-253 CORE and ITE G.957 standards

What are ASEs?

ASEs (Analysis Service Elements) are data collection and network performance monitor- ing hardware devices placed on a wide area network (WAN) or Local Area Network (LAN) as part of the Visual UpTime Select system, which offers in-depth, real-time, and historical visibility into the performance of your applications infrastructure. In the system, data gathered by ASEs is stored in the Visual UpTime Select server and displayed and ana- lyzed from the Visual UpTime Select Web client. As a service level management tool, ASEs indicate when services are being met, provide warnings when services start to degrade, and send alerts when services are not met.

Hardware Warranties

Enhanced Gold, Bronze, and International Gold ASE hardware warranty service programs are available to help you maximize your investment in Visual UpTime Select. For more detailed warranty information, visit: www.flukenetworks.com/visualcustomercare

Ordering Information

For more details, please contact your Visual UpTime Select authorized reseller or Fluke Networks Sales at (800) 240-4010 or (301) 296-2300.

N E T W O R K S U P E R V I S I O N

Fluke Networks

P.O. Box 777, Everett, WA USA 98206-0777

Fluke Networks operates in more than 50 countries worldwide. To find your local office contact details, go to www.flukenetworks.com/contact.

©2006 Fluke Corporation. All rights reserved. Printed in U.S.A. 2/2006 2643526 D-ENG-N Rev A