Fluke 807-0115 manual Compliance in US and Canada

T1 CSU/DSU ASE specifcations

General	Dimensions	8.16” (20.7 cm) x 9.0” (22.8 cm) x 1.62”(4.1 cm)
		Plastic case with internal power supply.
	Weight	2.10 lbs.
	Data Rate	1.544 Mbps synchronous
	Timing Mode	Derived externally from the T1 network or DSX-1
		interface, or internally from the ASE.
Environment	Operating Temperature	0o to +40oC (+32o to +104o F)
	Storage Temperature	-20oto +55oC (-4oto +131o×F)
	Clearance Requirement	Minimum of 3” (7.62 cm) space on sides.
	Operating/Storage Humidity	10% to 90%, noncondensing
Power Requirements	Input	100 to 120 VAC
	Frequency	50/60 Hz
	Input Current Rating	0.5 amps
T1 Network Interface	Line Rate	1.544 Mbps ±50 bps synchronous
	Line Format	AMI or B9ZS line coding
	Framing	ESF or D4 framing formats
	ESF FDL	ANSI T1.403, AT&T TR54016, Both, or None
	Input Signal	0dB to -36dB
	Output Signal	0, -7.5dB, -15dB, -22.5dB LBO
	Pulse Density	AT&T 62411
	Connector	8-pin modular jack—USOC: RJ48C
	Timing	Loop, DSX-1, or Internal
	Channel Selection	1 to 24 channels in any combination
Network DTE Interface	Configuration	DCE for interfacing with DTE
(Data Port)
	Data and Clock Leads	ITU-T V.35
	Signaling Leads	EIA RS-232 (ITU-T V.28)
	Data Rates	56 kbps x N or 64 kbps x N (N = 1 through 24)
	HDLC Inversion	Selectable V.35 data inversion
	Transmit Timing Basis	Network selected-source timing
	Receive Timing Basis	SCT, inverted SCT, SCTE
	Receive Line Data Not Valid	RLSD, CTS
	Connector	Female 34-pin V.35 connector
DSX-1 Interface	Line Rate	1.544 Mbps ±50 bps
	Line Format	AMI or B8ZS
	Framing	ESF or D4 (SF)
	Input Signal	-1dB to -11dB
	Line Equalization	0 ft, 133 ft, 266 ft, 399 ft, 533 ft, 655 ft
	Connector	RJ-45
	Channel Selection	1 to 24 channels in any combination
Serial Port Interface	Specifications	19200 or 9600 bps baud rate, 8 data bits no parity,
		1 stop bit, EIA RS-232 DTE electrical format, RJ-45
		connector
Ethernet 10/100BaseT	Bite Rate	10 or 100 Mbps
Interface
	Connector	8-pin modular jack: RJ-48
Modem	Specifications	RJ11 connector, FCC Part 68 and IC-CS03 standards,
		compliance in US and Canada

What are ASEs?

ASEs (Analysis Service Elements) are data collection and network performance monitor- ing hardware devices placed on a wide area network (WAN) or Local Area Network (LAN) as part of the Visual UpTime Select system, which offers in-depth, real-time, and historical visibility into the performance of your applications infrastructure. In the system, data gathered by ASEs is stored in the Visual UpTime Select server and displayed and ana- lyzed from the Visual UpTime Select Web client. As a service level management tool, ASEs indicate when services are being met, provide warnings when services start to degrade, and send alerts when services are not met.

Hardware Warranties

Enhanced Gold, Bronze, and International Gold ASE hardware warranty service programs are available to help you maximize your investment in Visual UpTime Select. For more detailed warranty information, visit: www.flukenetworks.com/visualcustomercare

Ordering Information

For more details, please contact your Visual UpTime Select authorized reseller or Fluke Networks Sales at (800) 240-4010 or (301) 296-2300.

N E T W O R K S U P E R V I S I O N

Fluke Networks

P.O. Box 777, Everett, WA USA 98206-0777

Fluke Networks operates in more than 50 countries worldwide. To find your local office contact details, go to www.flukenetworks.com/contact.

©2006 Fluke Corporation. All rights reserved. Printed in U.S.A. 2/2006 2643363 D-ENG-N Rev A