Fluke 807-0115 manual T1/E1 inline probe ASE

Visual UpTime Select

ASE model 807-0113

T1/E1 inline probe ASE

W i t h L i n k S a f e c a p a b i l i t i e s

Key features

•Inband management capabilities

•LinkSafe technology

•Power loss detection

•Multi-Protocol or IP Transport software

•Service Level Agreement (SLA) metrics

•Voice over IP (VoIP) analysis capability

•Application analysis capability

•LMI spoofing

•LAN management port

•Realtime events

The Visual UpTime® Select™ T1/E1 LinkSafe™ inline probe ASE is deployed inline on a T1 or E1 access line, typically between a service provider’s edge device and CSU/DSU. This ASE supports Multi-Protocol software for deployment in standard frame relay or HDLC networks and IP Transport software for deployment in frame relay or HDLC-based networks that use IP switching. The ASE also includes LinkSafe technology to protect circuit integrity in case of an ASE outage, as well as power failure notification.

T1/E1 inline probe model 807-0113 front view

T1/E1 inline probe model model 807-0113 rear view

When configured for use on an E1 network, the ASE complies with the physical/electrical characteristics defined by ITU-T G.703 at 2.048 Megabits per second (Mbps). The ASE also complies with the synchronous frame structure specifications defined by ITU-T G.704, including the option to use channel 16 for data or signalling. You can either connect to the E1 network using a 120 ohm balanced cable or BNC coax 75 ohm unbalanced cables.

Optional LAN Connection

T1/E1 Access Line

LAN

WAN

T1/E1 inline ASE CSU/DSU CPE Router

Visual UpTime

Select Server

T1/E1 inline probe model 807-0113 position on network

Technical Data