X.21 inline probe ASE specifcations
General | Dimensions | 8.16” (20.7 cm) x 9.0” (22.8 cm) x 1.62”(4.1 cm) | |
|
| Plastic case with internal power supply | |
|
|
| |
| Weight | 2.10 lbs. | |
|
|
| |
| Data Rate | 0 to 2.048 Mbps synchronous | |
|
|
| |
| Timing Mode | RD: Always synchronous with SCR | |
|
| SD: Synchronous with SCT or SCTE | |
|
|
| |
Environment | Operating Temperature | 0o to +40oC (+32o to +104o F) | |
|
|
| |
| Storage Temperature | ||
|
|
| |
| Clearance Requirement | Minimum of 3” (7.62 cm) space on sides. | |
|
|
| |
| Operating and Storage | 10% to 80%, noncondensing | |
| Humidity |
| |
|
|
| |
Power Requirements | Input | 100 to 240 VAC | |
|
|
| |
| Frequency | 50/60 Hz | |
|
|
| |
| Input Current Rating | 0.5 amps | |
|
|
| |
X.21 User Interface | Configuration | DCE for interfacing with DTE | |
(DCE) |
|
| |
Data and Clock Leads | |||
| |||
|
|
| |
| Signaling Leads | ||
|
|
| |
| Connector | Female | |
|
|
| |
| Signaling | Indicate: Clear to Send control signal to the user | |
|
| interface. Received and terminated by the ASE. | |
|
|
| |
X.21 Network | Configuration | DTE for interfacing with DCE | |
Interface (DTE) |
|
| |
Data and Clock Leads | |||
| |||
|
|
| |
| Signaling Leads | ||
|
|
| |
| Connector | Female | |
|
|
| |
| Signaling | Control: Request to Send control signal from the | |
|
| user interface. On while power is applied by the | |
|
| ASE. | |
|
|
| |
Serial Port Interface | Baud Rate | 19200 or 9600 bps | |
|
|
| |
| Parity | 8 data bits, no parity | |
|
|
| |
| Stop Bit | 1 stop bit | |
|
|
| |
| Electrical Format | EIA | |
|
|
| |
| Connector | ||
|
|
| |
Ethernet 10/100BaseT | Bite Rate | 10 or 100 Mbps | |
Interface |
|
| |
Connector | |||
| |||
|
|
|
What are ASEs?
ASEs (Analysis Service Elements) are data collection and network performance monitor- ing hardware devices placed on a wide area network (WAN) or Local Area Network (LAN) as part of the Visual UpTime Select system, which offers
Hardware Warranties
Enhanced Gold, Bronze, and International Gold ASE hardware warranty service programs are available to help you maximize your investment in Visual UpTime Select. For more detailed warranty information, visit: www.flukenetworks.com/visualcustomercare
Ordering Information
For more details, please contact your Visual UpTime Select authorized reseller or Fluke Networks Sales at (800)
N E T W O R K S U P E R V I S I O N
Fluke Networks
P.O. Box 777, Everett, WA USA
Fluke Networks operates in more than 50 countries worldwide. To find your local office contact details, go to www.flukenetworks.com/contact.
©2006 Fluke Corporation. All rights reserved. Printed in U.S.A. 2/2006 2643152